How to (In)Visibly Re-Weave a Hole

DSC00223.JPG
DSC00292.jpg

In this module I have a video demonstrating how to re-weave a textile as well as a photo diagram. Finer fabrics are harder to see so if you have a fine textile I would recommend very good light and magnification.

DSC00252.JPG
DSC00258.JPG

Step 1: Weave over and under starting from 1/4 inch (.625 cm) to a 1/2 inch( 1 cm) away from the hole. The finer the fabric the closer you begin, the heavier the fabric the father away. Follow the yarns in the fabric. Using the follow diagram as a general guide:

Darning part 1.png
Step two: Rotate the fabric 90 degrees and weave in the same manner as before but across the threads you laid down. When you weaving over the hole make sure you are still going over and under the new threads you have stitched this is what will creat…

Step two: Rotate the fabric 90 degrees and weave in the same manner as before but across the threads you laid down. When you weaving over the hole make sure you are still going over and under the new threads you have stitched this is what will create new fabric where the hole used to be.